| |
| |
| |
USER
SPECIFICATION
Video / audio signal recorder / player.
Fast access to scenes and takes.
Signal video mixed , mix key or external chroma key
with hard disk storage signal.
Edition of the takes storages in hard disk in real
time for doing a take pre making.
Speed change of reproduction from 1 to 400 frames.
Different screen formats: 4/3 (1:1, 33) 16/9 (1:1,
78) and anamorphic 1:2.35 switchable.
External keyboard connection for introduce comments
about the take.
Beginning of the recording manual or automatic sincro
with camera on.
Recording step by step manual or timer.
Serial connection for DHD Recorder as you require.
That permits to have as equipments as cameras you
have in the same scene, all controlled from one master.
All these are transformed in a controlled network
by just one recorder / player unifying all the points
of view of one scene.
Screen information:
- Camera 1 ,camera 2
- Scene
- Take
- Camera speed
- Shutter position
- Tape code or time
code
- Comments
|
|
TECHNIC
SPECIFICATION
Digital video ( 4:2:2) internal
Video compression based on wavelets (level of compression
1 – 100)
Withdrawable hard disk
Storage: from 3 h (maximum quality) to 65 h ( maximum
compression)
Video:
- CUBS: NTSC/PAL, 1 Vpp,
75 Ohm, BCN
- 2 inputs
- 5 clean outputs
- 1 output with screen
information
Audio:
- Exterior interface:
analog (RCA)
- Inputs: 2 stereo channels
or 4 mono channels
- Outputs: 2 stereo channels
or 4 mono channels
- Until 24 bit ADC &
DAC, 96 KHz of sampling, without block
- Stereo output for headphones
Time code:
- 1 input 1 output
- Specifications SMPTE
,EBULTC and VITC
- Frequency: 30 Hz, 29.97
Hz, 25 Hz y 24 Hz
Screen information:
- On screen display (OSD)
as an output user interface for information and equipment
control.
User interface:
- Graphic LCD screen (128
x 64) illuminated
- Keyboard illumination
for working without natural light
- High sensitivity encoder
for the control of playback
- Remote control by infrared
Possibility of connect various equipments by RS 485
(connectors DB – 9)
External keyboard connection PS – 2
Temperature and internal feed motorization
Battery feed (DC 19 – 40 V)
Output 12 V for external monitor |
|
|
|
